Optimization Of Multiple Objectives in The Machining Process of SS304 Sheet Metal Components.
DOI:
https://doi.org/10.63682/jns.v14i14S.4132Keywords:
SS 304SS 304, Grey relation analysis, Tool life, Production timeAbstract
A comprehensive investigation has been conducted on the settings for the turning operation of SS 304. This study utilizes the Grey-Based Taguchi method to explore the multi-objective optimization of the turning process, aiming to determine the optimal combination of settings that results in the shortest production time and the longest tool life. The parameters examined include feed rate, cutting speed, and depth of cut. To address the multi-response optimization challenge, nine experimental runs were performed based on Taguchi’s L9 orthogonal array, followed by a Grey relational analysis. The Grey relational grade value was employed to ascertain the most effective parameter levels. Additionally, the analysis of variance (ANOVA) will play a crucial role in identifying the key parameters among speed, feed, and cut depth.
Downloads
Metrics
References
K. Soorya Prakash, P.M. Gopal, S. Karthik, Multi-objective optimization using Taguchi based grey relational analysis in turning of Rock dust reinforced Aluminum MMC, Measurement 157 (2020) 107664.
R. Viswanathan, S. Rameshb, V. Subburam, Measurement and optimization of performance characteristics in turning of Mg alloy under dry and MQL conditions, Measurement 120 (2018) 107–113.
S.J. Raykara, D.M. D’Addonab, A.M. Mane, Multi-objective optimization of high speed turning of Al 7075 using grey relational analysis, Procedia CIRP 33 (2015) 293–298.
P. Sivaiah, D. Chakradhar, Performance improvement of cryogenic turning process during machining of 17–4 PH stainless steel using multi objective optimization techniques, Measurement 136 (2019) 326–336.
R. Viswanathan, S. Ramesh, S. Maniraj, V. Subburam, Measurement and multiresponse optimization of turning parameters for magnesium alloy using hybrid combination of Taguchi-GRA-PCA technique, Measurement 159 (2020) 107800.
P. Umamaheswarrao, D. Ranga Raju, K.N.S. Suman, B. Ravi Sankar, Multi objective optimization of Process parameters for hard turning of AISI 52100 steel using Hybrid GRA-PCA, Procedia Comput. Sci. 133 (2018) 703–710.
R.A. Kazeem, D.A. Fadare, J. Abutu, S.A. Lawal, O.S. Adesina, Performance evaluation of jatropha oil-based cutting fluid in turning AISI 1525 steel alloy, CIRP J. Manufact. Sci. Technol. 31 (2020) 418–430.
M. Abas, L. Sayd, R. Akhtar, Q.S. Khalid, Aqib Mashood Khan and Catalin Iulian Pruncu. Optimization of machining parameters of aluminum alloy 6026–T9 under MQL-assisted turning process, J. Mater. Res. Technol. 9 (5) (2020) 10916–10940.
A. Aslan, Optimization and analysis of process parameters for flank wear, cutting forces and vibration in turning of AISI 5140: A comprehensive study, Measurement 163 (2020) 107959.
S.M. Bazaz, M. Lohtander, J.h. Varis, The prediction method of tool life on small lot turning process – Development of Digital Twin for production, Procedia Manuf. 51 (2020) 288–295.
M. Durairaj, S. Gowri, Parametric Optimization for Improved Tool Life and Surface Finish in Micro Turning using Genetic Algorithm, Procedia Eng. 64 (2013) 878–887.
W. Bouzid, Cutting parameter optimization to minimize production time in high speed turning, J. Mater. Process. Technol. 161 (3) (2005) 388–395.
P. Pangestu, Eko Pujiyanto and Cucuk Nur Rosyidi. Multi-objective cutting parameter optimization model of multi-pass turning in CNC machines for sustainable manufacturing, Heliyon. 7 (2021) e06043.
D.u. Maja, Ezutah Udoncy Olugu and Sunday Albert Lawal. Analysis of the effect of sustainable lubricants in the turning of AISI 304 stainless steel, Procedia Manuf. 43 (2020) 495–502.
I. Asiltürk, S. Neseli, Multi response optimisation of CNC turning parameters via Taguchi method-based response surface analysis, Measurement 45 (2012) 785–794
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
Terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
