Investigation The Non Linear optical Properties and Spectroscopy Properties of Polyimide Using DFT
Keywords:
Spectroscopy Properties, Polyimide, DFTAbstract
In the current work, nonlinear optical(NLO) properties of polyimide (PI) including polarizability (α), dipole moment (μ), first order hyperpolarizability (β), and susceptibility (χ), have been calculated by using (DFT)\B3LYP method with a 6-311G(d,p) basis set. The results show that the anisotropy of polarizability and first hyperpolarizability is found to have significant values of 259.1x 10-24 esu and 160.4518 x10-33 esu for DFT method. These very small values reflect that the polyimide compound is a good insulator. Moreover, Spectroscopy properties like infrared (IR) absorption spectroscopy, and ultraviolet (UV) Spectroscopy have been calculated by using the DFT method.
Downloads
Metrics
References
.Ismail, A., D. Nasrallah, and E. El-Metwally, Modulation of the optoelectronic properties of polyimide (Kapton-H) films by gamma irradiation for laser attenuation and flexible space structures. Radiation Physics and Chemistry, 2022. 194: p. 110026.
Ohya, H., V. Kudryavsev, and S.I. Semenova, Polyimide membranes: applications, fabrications and properties. 1997: CRC Press.
Sezer Hicyilmaz, A. and A. Celik Bedeloglu, Applications of polyimide coatings: A review. SN Applied Sciences, 2021. 3: p. 1-22.
Feger, C., Advances in polyimide: science and technology. 1993: CRC Press.
Cen-Puc, M., et al., An assessment of surface treatments for adhesion of polyimide thin films. Polymers, 2021. 13(12): p. 1955.
Boll, D., et al., Miniaturized flexible interdigital sensor for in situ dielectric cure monitoring of composite materials. IEEE sensors journal, 2014. 14(7): p. 2193-2197.
Yang, T., et al., Fabrication of silver interdigitated electrodes on polyimide films via surface modification and ion-exchange technique and its flexible humidity sensor application. Sensors and Actuators B: Chemical, 2015. 208: p. 327-333.
Hübner, M., et al., Online monitoring of moisture diffusion in carbon fiber composites using miniaturized flexible material integrated sensors. Sensors, 2019. 19(8): p. 1748.
Engel, J., J. Chen, and C. Liu, Development of polyimide flexible tactile sensor skin. Journal of micromechanics and microengineering, 2003. 13(3): p. 359.
Lin, F., et al., High-performance polyimide filaments and composites improved by O2 plasma treatment. Polymers, 2018. 10(7): p. 695.
Qu, H., Z. Wang, and D. Cang, Flexible bandpass filter fabricated on polyimide substrate by surface modification and in situ self-metallization technique. Polymers, 2019. 11(12): p. 2068.
Park, Y.J., et al., Surface modification of polyimide films by an ethylenediamine treatment for a flexible copper clad laminate. Macromolecular Research, 2012. 20: p. 168-173.
M. J. Frisch, G.W.T., H. B. Schlegel, G. E. Scuseria, M. A. Robb, J. R. Cheeseman, G. Scalmani, V. Barone, G. A. Petersson, H. Nakatsuji, X. Li, M. Caricato, A. Marenich, J. Bloino, B. G. Janesko, R. Gomperts, B. Mennucci, H. P. Hratchian, J. V. Ortiz, A. F. Izmaylov, J. L. Sonnenberg, D. Williams-Young, F. Ding, F. Lipparini, F. Egidi, J. Goings, B. Peng, A. Petrone, T. Henderson, D. Ranasinghe, V. G. Zakrzewski, J. Gao, N. Rega, G. Zheng, W. Liang, M. Hada, M. Ehara, K. Toyota, R. Fukuda, J. Hasegawa, M. Ishida, T. Nakajima, Y. Honda, O. Kitao, H. Nakai, T. Vreven, K. Throssell, J. A. Montgomery, Jr., J. E. Peralta, F. Ogliaro, M. Bearpark, J. J. Heyd, E. Brothers, K. N. Kudin, V. N. Staroverov, T. Keith, R. Kobayashi, J. Normand, K. Raghavachari, A. Rendell, J. C. Burant, S. S. Iyengar, J. Tomasi, M. Cossi, J. M. Millam, M. Klene, C. Adamo, R. Cammi, J. W. Ochterski, R. L. Martin, K. Morokuma, O. Farkas, J. B. Foresman, and D. J. Fox, Gaussian, Inc., Wallingford CT, 2016.
Ramalingam, S., et al., Spectroscopic (infrared, Raman, UV and NMR) analysis, Gaussian hybrid computational investigation (MEP maps/HOMO and LUMO) on cyclohexanone oxime. 2012. 96: p. 207-220.
Asghari-Khiavi, M., P. Hojati-Talemi, and F.J.J.o.M.S.T. Safinejad, Polarizability and first-order hyperpolarizability of cyclic imides. 2009. 910(1-3): p. 56-60.
Kosar, B. and C. Albayrak, Spectroscopic investigations and quantum chemical computational study of (E)-4-methoxy-2-[(p-tolylimino) methyl] phenol. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 2011. 78(1): p. 160-167.
Lei, H., et al., DFT and molecular dynamic simulation for the dielectric property analysis of polyimides. Chemical Physics Letters, 2022. 786: p. 139131.
Raja, M., et al., Synthesis, spectroscopic (FT-IR, FT-Raman, NMR, UV–Visible), NLO, NBO, HOMO-LUMO, Fukui function and molecular docking study of (E)-1-(5-bromo-2-hydroxybenzylidene) semicarbazide. Journal of Molecular Structure, 2017. 1141: p. 284-298.
Cairns, T., et al., Modern methods of chemical analysis. Pecsok. 1976: John Wiley & Sons.
Altun, A., K. Gölcük, and M. Kumru, Structure and vibrational spectra of p-methylaniline: Hartree-Fock, MP2 and density functional theory studies. Journal of Molecular Structure: THEOCHEM, 2003. 637(1-3): p. 155-169.
Diaham, S., et al., Thermal imidization optimization of polyimide thin films using Fourier transform infrared spectroscopy and electrical measurements. Thin solid films, 2011. 519(6): p. 1851-1856.
Varsányi, G., Vibrational spectra of benzene derivatives. 2012: Elsevier.
Amul, B., et al., Spectral, DFT and molecular docking investigations on Etodolac. Journal of Molecular Structure, 2019. 1195: p. 747-761.
Barbet, F., et al., Comparative Raman spectroscopy studies of photosensitive polymers. Materials chemistry and physics, 1998. 55(3): p. 202-208.
Boopathi, M., et al., ISSN 0975-413X CODEN (USA): PCHHAX.
Ando, S., et al., Effective reduction of volumetric thermal expansion of aromatic polyimide films by incorporating interchain crosslinking. Polymers, 2018. 10(7): p. 761.
..
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
Terms:
- Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
- No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
